xfsdump命令使用

<div id="article_content" class="article_content">

一：使用xfsdump备份和恢复xfs文件系统

首先了解一下xfsdump的备份级别有以下两种，默认为0（即完全备份）

0 ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?完全备份

1 ? ?<= ? level <= 9 ? ? ?增量备份

1.创建xfs文件系统并挂载到/data目录下

-x4xj:~ # mkfs.xfs /dev/sdb

linux-x4xj:~ # mkdir /data

linux-x4xj:~ # mount /dev/sdb /data

linux-x4xj:~ # df -h

Filesystem????? Size?Used Avail Use% Mounted on

/dev/sda2?????? 4.0G?1.6G? 2.2G? 43% /

devtmpfs??????? 465M?168K? 465M?? 1% /dev

tmpfs?????????? 465M???? 0?465M?? 0% /dev/shm

/dev/sdb????? ???20G??33M?? 20G?? 1% /data

linux-x4xj:~ #

2.备份

首先复制一些文件到/data目录下，以便测试，如下所示

linux-x4xj:~ # ls -l /data

total 1792

-rwxr--r-- 1 nobody nobody 1832960 Sep 1314:12 iozone3_429.tar

drwxr-xr-x 2 nobody nobody???? 102 Sep 16 20:46 lustre-client-el5.8-2.1.6

linux-x4xj:~ #

◆首先备份/data整个目录到/tmp目录下

测试过程中发现：如果命令这样写xfsdump -f /tmp/dump_data /data/，就会提示错误（xfsdump:ERROR: /data/ does not identify a file system）

?

linux-x4xj:~ # xfsdump -f /tmp/dump_data /data/

xfsdump: using file dump (drive_simple)strategy

xfsdump: version 3.0.5 (dump format 3.0) -Running single-threaded

?

?============================= dump labeldialog ==============================

?

please enter label for this dump session(timeout in 300 sec)

?-> dump_data

session label entered:"dump_data"

?

?---------------------------------end dialog ---------------------------------

?

xfsdump:

xfsdump: usage: xfsdump [ -a (dump DMFdualstate files as offline) ]

?????????????????????????? *

????????????????????????? ?*

?????????????????????????? *

?

?

必须要这样写xfsdump -f /tmp/dump_data /data（即/data后面的/不能要）这样才能成功

?

linux-x4xj:~ # xfsdump -f /tmp/data_dump /data

xfsdump: using file dump (drive_simple)strategy

xfsdump: version 3.0.5 (dump format 3.0) -Running single-threaded

?

?============================= dump labeldialog ==============================

?

please enter label for this dump session(timeout in 300 sec)

?-> data_dump

session label entered:"data_dump"

?

?--------------------------------- end dialog---------------------------------

?

xfsdump: level 0 dump of linux-x4xj:/data

xfsdump: dump date: Tue Sep 16 20:58:582014

xfsdump: session id:ca3390ef-1a8c-429b-8d87-4e60d22d3c54

xfsdump: session label: "data_dump"

xfsdump: ino map phase 1: constructinginitial dump list

xfsdump: ino map phase 2: skipping (nopruning necessary)

xfsdump: ino map phase 3: skipping (onlyone dump stream)

xfsdump: ino map construction complete

xfsdump: estimated dump size: 70670208bytes

?

?============================= media labeldialog =============================

?

please enter label for media in drive 0(timeout in 300 sec)

?-> media0

media label entered: "media0"

?

?--------------------------------- end dialog---------------------------------

?

xfsdump: creating dump session media file 0(media 0,file 0)

xfsdump: dumping ino map

xfsdump: dumping directories

xfsdump: dumping non-directory files

xfsdump: ending media file

xfsdump: media file size 70680352 bytes

xfsdump: dump size (non-dir files) :70656816 bytes

xfsdump: dump complete: 9 seconds elapsed

xfsdump: Dump Status: SUCCESS

linux-x4xj:~ # ls -l /tmp/data_dump

-rw-r--r-- 1 root root 70680352 Sep 1620:59 /tmp/data_dump

linux-x4xj:~ #

以上为会话模式，即会提示让你输入label for session和label for dump，可以用下面的命令运行，就不会出现会话模式了

linux-x4xj:~ # xfsdump -f /tmp/data_dump /data -L data_dump -M data_dump

?

◆备份/data目录下的lustre-client-el5.8-2.1.6子目录到/tmp目录下，命令如下

linux-x4xj:~ # xfsdump -f /tmp/data_lustre_client_dump -s lustre-client-el5.8-2.1.6 /data -L data_lustre_client_dump -M media0 （注意子目录前面不能有/，最后面也不能有/）

?

xfsdump: using file dump (drive_simple)strategy

xfsdump: version 3.0.5 (dump format 3.0) -Running single-threaded

xfsdump: level 0 dump of linux-x4xj:/data

xfsdump: dump date: Tue Sep 16 21:07:14 2014

xfsdump: session id:12d13ad4-47d2-4ea5-94df-afc2d71cb6a4

xfsdump: session label:"data_lustre_client_dump"

xfsdump: ino map phase 1: constructinginitial dump list

xfsdump: ino map phase 2: skipping (nopruning necessary)

xfsdump: ino map phase 3: skipping (onlyone dump stream)

xfsdump: ino map construction complete

xfsdump: estimated dump size: 68834880bytes

xfsdump: creating dump session media file 0(media 0,file 0)

xfsdump: dumping ino map

xfsdump: dumping directories

xfsdump: dumping non-directory files

xfsdump: ending media file

xfsdump: media file size 68845344 bytes

xfsdump: dump size (non-dir files) :68822096 bytes

xfsdump: dump complete: 0 seconds elapsed

xfsdump: Dump Status: SUCCESS

linux-x4xj:~ # ls -l /tmp/data_lustre_client_dump

-rw-r--r-- 1 root root 68845344 Sep 1621:07 /tmp/data_lustre_client_dump

linux-x4xj:~ #

?

◆克隆/data（备份所有内容到另一个目录或到另一个硬盘下），本次新加了一个盘用作备份，挂载到了/data2下，开始克隆，命令如下

linux-x4xj:~ #xfsdump - /data | xfsrestore - /data2

???????????????????????????? 或者

linux-x4xj:~ #xfsdump -l 0 - /data | xfsrestore - /data2 （因为默认级别为0）

linux-x4xj:~ # ll /data

total 1792

-rwxr--r-- 1 nobodynobody 1832960 Sep 13 14:12 iozone3_429.tar

drwxr-xr-x 2 nobodynobody???? 102 Sep 16 20:46lustre-client-el5.8-2.1.6

linux-x4xj:~ # ll /data2/

total 1792

-rwxr--r-- 1 nobodynobody 1832960 Sep 13 14:12 iozone3_429.tar

drwxr-xr-x 2 nobodynobody???? 102 Sep 16 20:46lustre-client-el5.8-2.1.6

linux-x4xj:~ #

?

◆只克隆/data下的子目录lustre-client-el5.8-2.1.6到/data2目录下，命令如下

linux-x4xj:~ #xfsdump - -s lustre-client-el5.8-2.1.6 /data | xfsrestore - /data2

??????????????????????????? 或者

linux-x4xj:~ #xfsdump -l 0 - -s lustre-client-el5.8-2.1.6 /data | xfsrestore - /data2

linux-x4xj:~ # ll /data2/

total 0

drwxr-xr-x 2 nobodynobody 102 Sep 16 20:46 lustre-client-el5.8-2.1.6

linux-x4xj:~ #

?

3.查看会话存档

可以使用xfsdump -I来查看session存档

linux-x4xj:~ #xfsdump -I??? （从存档中选择了一个会话内容如下）

??????? session 2:

??????????????? mount point:??? linux-x4xj:/data

??????????????? device:???????? linux-x4xj:/dev/sdb

??????????????? time:?????????? Tue Sep 16 20:58:58 2014

??????????????? session label:? "data_dump"?????????????????? （会话标识）

??????????????? session id:???? ca3390ef-1a8c-429b-8d87-4e60d22d3c54

??????????????? level:????????? 0

??????????????? resumed:?? ?????NO

??????????????? subtree:??????? NO

??????????????? streams:??????? 1

??????????????? stream 0:

??????????????????????? pathname:?????? /tmp/data_dump

??????????????????????? start:????????? ino 131 offset 0

??????????????????????? end:??????????? ino 136 offset 0

??????????????????????? interrupted:??? NO

??????????????????????? media files:??? 1

??????????????????????? media file 0:

??????????????????????????????? mfileindex:??? 0

??????????????????????????????? mfiletype:???? data

??????????????????????????????? mfilesize:???? 70680352

??????????????????????????????? mfilestart:??? ino 131 offset 0

??????????????????????????????? mfile end:????? ino 136 offset 0

??????????????????????????????? medialabel:??? "media0"???????????? （介质标识）

??????????????????????????????? media id:?????? 43881f83-231f-4835-a858-4d4ade150efe

?

4.使用xfsrestore恢复数据

★模拟删除/data目录内的所有内容，然后恢复数据

linux-x4xj:~ # rm -rf /data/*

linux-x4xj:~ #xfsrestore -f /tmp/data_dump /data

★根据会话标识，只恢复某个文件或者是子目录

linux-x4xj:~#xfsrestore-f /tmp/data_dump -L data_dump -s lustre-client-el5.8-2.1.6 /data

?

5.在没有进行恢复之前可以通过xfsrestore? -f?/tmp/data_dump? -t查看data_dump内容

（编辑：武汉站长网）

【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!